Share your favorites on Show & Tell

British Enfield Pattern 1853 Rifle Musket, Indian Manufacture

In Military and Wartime > Show & Tell and Victorian Era > Show & Tell.
All items165902 of 244562British Pattern 1853 Bayonet with ScabbardBritish Pattern 1839 Bayonet with Lovell Catch
11
Love it
0
Like it

aghcollectaghcollect loves this.
fortapachefortapache loves this.
SimplyLogisticsSimplyLogistics loves this.
EJW-54EJW-54 loves this.
Blackshiep1Blackshiep1 loves this.
officialfuelofficialfuel loves this.
pw-collectorpw-collector loves this.
kerry10456kerry10456 loves this.
blunderbuss2blunderbuss2 loves this.
walksoftlywalksoftly loves this.
vanskyock24vanskyock24 loves this.
See 9 more
Add to collection

    Please create an account, or Log in here

    If you don't have an account, create one here.


    Create a Show & TellReport as inappropriate


    Posted 11 years ago

    Chrisnp
    (310 items)

    The 1853 Rifle Musket was used extensively by the end of the Crimean War, as well as being imported to the US during the American Civil War. “Rifle Musket” sounds a bit redundant to us, but it was intended to indicate the rifle was the same length as the musket it replaced.

    The 1853 Enfield was issued to Indian troops starting in 1856. Afterward, the story goes that rumors began to spread that the paper cartridges for the Enfield were greased with pork and/or beef – a violation of both Muslim and Hindu practices, as the cartridge was to be torn open with the soldier’s teeth before pouring the powder down the barrel and ramming home the bullet. This supposedly contributed to the Indian Mutiny of 1857. How true that is, I am not certain, but it makes an interesting story.

    My 1853 Enfield has what I believe is Hindi script on the lock where we would normally find the British crown. My understanding is that this pattern rifle continued to be made in India after it was obsolete in Britain in part because after the Indian Mutiny, the British Empire was less inclined to give Indian troops technological parity with British troops. I can’t recall where I read that, but it would make sense. Based on the fact that this weapon, like the last one I posted, is documented to have come from a huge cache of antique arms that were stored away in a palace armory in Kathmandu Nepal makes me confident that this is a period piece and not a recent reproduction sold in the bazaars to tourists.

    Like the British Enfield, it is .577 caliber and weighs about 9 ½ pounds (4.3 kg) and about 55 inches (140 cm) long. It’s rear sight is graduated in what I believe is also Hindi Script, but looks to be the same as the British sights which were graduated from 100 to 400 yards. It could also be flipped up to go out to a maximum of 1,250 yards, although I think that would be pretty optimistic. Like the original British pattern, the barrel is held on by three bands, and the pattern is sometimes referred to as the “three band Enfield”

    I managed to find a correct pattern 1853 bayonet, also with Hindi script, and War Department marked scabbard, which I’ll detail in my next post. More scarce is the vintage white buff leather sling, which is correct for the period and the rifle. I purchased it at another auction years later. It's pretty delicate and is on the musket for display only.

    Now, the fun part for Blunder and any other black powder enthusiasts: I took this to the range and set up a standard 100 yard target at 50 yards. Firing a .570”, 276 grain patched ball with 60 grains of Goex FFg, I fired three rounds and never hit paper. I upped the powder to 70 grains, and still nothing. At 80 grains I scored four out of four hits – one in the 7 ring, two in the 5 ring, and one just outside the 5 ring. At that point the detonations were throwing back the hammer, and on the last shot the lock froze up with the hammer all the way back – so after managing to free the hammer, I retired this old piece for good.

    WARNING: Load data is provided for information only. Many vintage firearms are unsafe to shoot and I do not advise use of this load data for other firearms since I do not know the specific firearm that may be involved or its condition.

    logo
    Military and Wartime
    See all
    Old Rare Vintage Antique Civil War Relic Confederate Canister Shot Appomattox VA
    Old Rare Vintage Antique Civil War ...
    $20
    Old Rare Antique Civil War Relic Bullets CSA & US Miniballs Appomattox, Virginia
    Old Rare Antique Civil War Relic Bu...
    $35
    Old Rare Vintage Antique Civil War Relic Miniball, Button and Marble
    Old Rare Vintage Antique Civil War ...
    $15
    Old Rare Vintage Antique Civil War Relic 3 Flint For Flintlock Hammer Musket Gun
    Old Rare Vintage Antique Civil War ...
    $20
    logo
    Old Rare Vintage Antique Civil War Relic Confederate Canister Shot Appomattox VA
    Old Rare Vintage Antique Civil War ...
    $20
    See all

    Comments

    1. blunderbuss2 blunderbuss2, 11 years ago
      Welcome to blk pdr shooting mate! I started shooting orig. C.W .58 rifles when 9 yrs old in the 50's. Even the .58's using Minie balls would foul so ad after about 10-12 rds that I have literally put the ramrod against tree to hammer the ball down. The more fouled, the harder the kick! Had an Enfield in that bloody .577 cal & as kids, couldn't find or afford a mold for .577 so used .58 Minies. The 1st round was not easy to get down & impossible after 2-3 rds without swabbing the bore with a wet patch. Had fun anyway.
      I'm surprised you went to 80 grs & even more surprised that accuracy improved over 70 grs. Usually the accuracy starts going down with the extra heavy loads. Just had my pharmacist ck my loads today for my rifle & blunderbusses & found that my pdr. measures were a bit off. My .50 rifle was kicking a bit to hard & both blunderbusses were trying to rip my arms off. Maybe 130 grs is a bit much! Dropping the .50 to 65 grs & the blunderbusses to about 90 grs.
    2. Chrisnp Chrisnp, 11 years ago
      Actually I got my '53 Enfield before my '42 musket, so I was a bit bolder with it. After all, the '53 was an Indian piece, and therefore didn't have the value of a British marked Enfield.

      But after the experience with my Enfield lock getting stuck, I didn't want to mess up my East India Company Musket, so I went soft on it. Probably as you point out, too soft.

      After this I'll be posting some black powder cartridge guns after this and am looking forward to your input.
    3. blunderbuss2 blunderbuss2, 11 years ago
      If the blow-back re-cocked the hammer, your charge was too heavy or more likely need a new nipple as well. That shouldn't ever happen.
    4. Chrisnp Chrisnp, 11 years ago
      Thanks for the love SimplyLogistics, petey, fortapache, EJW-54, Blackshiep1, officialfuel, pw-collector, kerry10456, blunder, walksoftly, and vanskyock24.
    5. Chrisnp Chrisnp, 11 years ago
      Thanks for the love fortapache.
    6. zainimarco, 5 years ago
      Hello, I'm writing from Italy. I own a musket that I would like to completely rebuild. I think it's an 1853 esfield Pattern. I'd like to identify it exactly.
      Can you help me please?
      Can I send you photos of it?
      Thanks so much.
      Marco Zaini Italy

    Want to post a comment?

    Create an account or login in order to post a comment.